A highly concentrated snow foam, to be used as a pre-wash or shampoo alternative. Safe for use on sealant, wax and all exterior surfaces, this product will lift dirt and grime without affecting existing paint or glass protection.
A key benefit of using Snow Foam to clean your vehicle is the reduced need for subsequent contact cleaning thus reducing the risk of scratching glass and paintwork.
This highly concentrated snow foam has been developed to deliver a thick and creamy foam at unbelievable dilution ratios. For most uses we recommend 200ml of Snow Foam, to be used in a snow foam lance with warm water, however this amount can be increased or decreased based on personal preference and the level of soiling on your vehicle.
Another benefit of Snow Foam is it’s ability to get into hard to reach areas that wash mitts, sponges and microfibre towels simply cannot touch.
You won’t believe the results until you try it yourself!
Snow Foam in action
Washing your car/vehicle with Snow Foam
Washing your car with Snow Foam by Pyramid Car Care is simple.
- Pressure Washer
- Foam Lance
Directions for use:
Connect your pressure washer to a stable water source and a safe electrical source, (unless you are using a gas or pump pressure washer).
Add 200ml of Snow Foam to your Foam Lance, top-up with warm water and spray liberally over your vehicle.
Leave the foam on your vehicle for 5 minutes. Then spray off the foam with clean water.
For heavily soiled vehicles, we recommend adding 100ml of Citrus Prewash to your solution for extra cutting power.
What is Snow Foam?
“Snowfoam is a particular way of pre-cleaning before washing the car with a washmitt or similar. Snowfoam will loosen up dirt and will move a lot of the dirt when it is rinsed off. Although Snowfoam can be applied with a special sprayer, it works best when applied with a special snowfoam-attachment on a pressure washer. Rinsing is also best done with a pressure washer.
Leaving it to dwell
“Snowfoam works by being left to dwell which loosens up dirt that can then be easily rinsed off. By rinsing if off and not having any physical contact with the paint, the risk of swirls is greatly minimized. It depends per manufacturer and/or per product, bit in general snowfoam is left to dwell for about 5 minutes. In this time it chemically breaks the bond of fats, loosens of dirt and breaks down grime. When the snowfoam is rinsed off, it will rinse away most of the dirt.”
This information above has been taken from detailingwiki.org.
Continue reading on detailingwiki.org to find out more include: common misconceptions, application, shampoo Vs snow foam, and the different types of snow foam.